Layout principles for lost foam casting

Lost foam production lines are generally divided into two areas: white area and black area. The working environment in the white area is relatively good, and it is generally a separate workshop. The Black Zone is also a separate workshop. The problem of the layout of the lost foam casting production line is mainly based on the following principle: the equipment layout is as compact as possible. Make the most of the spatial location. The connection distance between the main equipment and each auxiliary equipment is kept as short as possible. In addition, the layout of equipment can be considered in combination with logistics channels and safety issues.
The lost foam casting production process is a large-flow production line formed by multiple sets of equipment. Reasonable production line layout can eliminate part of the cost caused by the connection between equipment and equipment, reduce unnecessary waste on the project, reduce the distance of the workshop logistics channel, improve production efficiency, reduce production costs, effectively use resources, and even extremely reasonable production line layout is conducive to the full play of production technology. (The distance between the paint in the white area and the molder after drying, the distance from the molten iron from the intermediate frequency furnace in the black area to the pouring line, etc.)